Wet Dry Vacuum Cleaner UAH012L: Essential Pricing and Tests
Wet Dry Vacuum Cleaner UAH012L: Essential Pricing and Tests
At the first published 300-unit tier, the UAH012L costs $160 per unit, so a buyer should validate more than its 16000Pa label. A wet dry vacuum cleaner is a cordless floor-care appliance that collects dry debris and liquid while washing hard floors; this guide turns the catalog data into an approval plan.
// 01 — Key takeaways
Catalog suction for UAH012L, paired with a 250W motor and dual roller brushes.
Published usage per charge from a 4000mAh battery; the listed charging time is 3 hours.
Separate clean-water and dirty-water tank capacities support wet pickup and floor washing.
Published unit-price range across the four catalog tiers from 300 to 1000 units.
Guilin Use at Home Technology Co., LTD documents seven production lines inside a 15,000 m² facility. Review the factory facts in our Trust Center.
// 02 — Suction decision
Is 16000Pa enough for a cordless wet dry vacuum cleaner?
For hard-floor spill pickup and routine debris, 16000Pa is a useful catalog starting point, not a complete performance verdict. A wet dry vacuum cleaner buyer should approve UAH012L only after a sample confirms pickup, water recovery, edge reach, roller contact, and battery behavior on the exact floors and soils in the target market.
Read pascals as one input, not the result
Pascals describe pressure, while cleaning performance also depends on airflow, the seal at the floor head, brush agitation, water delivery, and the path that carries dirty liquid to the tank. Two machines with different Pa figures can therefore behave differently on crumbs, hair, tracked soil, and shallow spills. The useful B2B question is whether the whole head-and-air-path system passes a repeatable sample test.
UAH012L combines its 16000Pa catalog figure with 250W rated power, powered traction, dual roller brushes, and automatic dirt detection. Powered traction and automatic dirt detection also affect maneuvering and power demand, giving buyers a more complete system to evaluate than suction pressure in isolation.
Why dual rollers change the sample protocol
Dual rollers add two contact points that can lift and move debris, but they also create two parts that buyers must inspect for hair wrap, drying, replacement access, and even contact across the head. In a controlled pickup test, run UAH012L along walls, across grout transitions, and through a measured mix of dry and wet soil. Record whether debris escapes behind the head or remains on the floor after one pass.
What should a suction test record?
Record the floor material, starting battery level, cleaning mode, soil mass or spill volume, number of passes, residue, and dirty-tank recovery. Use the same setup for every candidate. Do not turn a supplier’s Pa value into an unsupported claim about area cleaned, stain removal, or carpet performance. A comparable protocol gives procurement a decision trail and marketing a defensible wording boundary.
“We answer fast, we honour our specifications, and we treat your first order as the start of a partnership.”
— Mi Lan, Founder, Guilin Use at Home Technology Co., LTD
// 03 — Runtime & tanks
Can a 40-minute runtime cover target floor plans?
For a wet dry vacuum cleaner, a published 40-minute usage time can cover many routine floor-care sessions, but area coverage cannot be inferred without a route test. Buyer approval should combine runtime with tank refill frequency, dirty-water emptying, turns, furniture, operator pace, and the power changes triggered by the model’s automatic dirt detection.
Map the duty cycle before choosing a battery
Start with a route that represents the intended home, hotel room, small office, or retail demonstration. Time active cleaning separately from setup, tank service, and obstacles. Repeat in the modes buyers will actually use. The UAH012L record lists a 4000mAh battery, 40 minutes of usage per charge, and a 3-hour charge time; it does not promise a particular square-meter result.
Automatic dirt detection can change power demand as soil conditions change. That is useful for an adaptive user experience, but it makes a single unloaded runtime demonstration less informative. Test a clean route and a soil-loaded route, logging the mode, conditions, and results so distribution teams have a clear basis for runtime wording.
Tank capacity can stop a route before the battery does
The clean-water tank holds 750ml and the dirty-water tank holds 600ml. The smaller dirty tank may set the practical service interval, depending on water delivery and recovery. Approval should check fill marks, lid seals, carrying posture, emptying control, and whether users can remove each tank without spilling. Never convert tank volume into floor area without a measured route.
Charge time affects fleet and hospitality use
A 3-hour catalog charge time matters differently in a home and in a shared housekeeping fleet. A consumer may recharge between sessions. A hotel or serviced-apartment operator may need charging slots, spare units, or a defined handover routine. The battery is not listed as detachable for UAH012L, so do not promise swap-and-go operation for this model.
// 04 — Approval sheet
What should buyers check beyond suction?
A wet dry vacuum cleaner buyer should freeze the electrical, battery, water-system, acoustic, packaging, labeling, and service details in one approved specification. UAH012L has a strong catalog record, but its 110–220V listing, battery transport file, market plug, user instructions, carton markings, and applicable compliance route still need order-specific confirmation before mass production.
UAH012L specification sheet
UAH012L wet dry vacuum cleaner specs
Rev. 2026.08
| Spec | Catalog value | Buyer relevance |
|---|---|---|
| Material | ABS | Confirm color, finish, markings, and chemical requirements for the destination market. |
| Rated power | 250W | Use with the approved charger and electrical configuration. |
| Voltage | 110–220V | Do not relabel as 100–240V; freeze plug, frequency, charger, and market markings. |
| Battery | 4000mAh | Request the battery identity and transport documentation tied to the shipped pack. |
| Charging time | 3 hours | Include in fleet rotation and user instructions. |
| Suction | 16000Pa | Record the result under the controlled pickup protocol rather than comparing the number alone. |
| Usage per charge | 40 minutes | Confirm the mode and route conditions behind market claims. |
| Water tanks | 750ml clean / 600ml dirty | Check service frequency, seals, emptying, and cleaning access. |
| Noise | 67dB | Confirm the measurement method before using the figure in compliance or marketing. |
| Accessories | Roller brush, cartridge | Freeze included parts, spares, and replacement references on the packing list. |
Packaging facts for freight planning
The product record lists a 29×24×110cm product size and 7.2kg product gross weight. Each unit uses a 79.5×33.5×28.2cm package; the export carton has the same listed dimensions, contains one unit, and weighs 10kg. These are catalog facts for the featured model. Use the signed carton specification, labels, and measured shipment data for freight booking.
Classify the intended use before selecting standards
The IEC vacuum and water-suction appliance page shows why the use case matters: household and similar appliances can include battery models and normal housekeeping by lay users in hotels or offices, while commercial wet/dry machines are directed to IEC 60335-2-69. Ask an accredited lab or compliance adviser to identify the current edition, national deviations, and exact product classification.
A catalog voltage is not a market approval. Freeze the destination country, plug, frequency, charger label, battery label, instructions, warnings, and required marks before the purchase order. Certification names must never substitute for the model-specific reports and documents relevant to the shipped configuration.
Keep the 67dB figure in context
UAH012L lists 67dB, but the catalog does not state a measurement distance, mode, room, or standard. Do not compare that single product figure directly with occupational exposure rules. The OSHA noise overview explains that its 85dBA trigger is an eight-hour time-weighted worker exposure. Product acoustics and workplace exposure are different measurements.
// 05 — Model choice
Which wet dry vacuum cleaner model fits the program?
The UAH012L wet dry vacuum cleaner fits buyers prioritizing dual rollers, a 750ml clean tank, 16000Pa suction, and a 40-minute catalog runtime. UAH18L shifts toward 18000Pa, a detachable 4400mAh battery, and 50 minutes, while UAH08L offers a lower-power 170W platform with a 30-minute runtime. All figures below come from direct model records.
Verified model comparison
| Model | Power | Suction / runtime | Water tanks | Distinctive catalog feature | Published entry tier |
|---|---|---|---|---|---|
| UAH012L Featured | 250W | 16000Pa / 40 minutes | 750ml clean / 600ml dirty | Dual roller brushes | $160 at 300 units |
| UAH18L | 250W | 18000Pa / 50 minutes | 600ml clean / 600ml dirty | Detachable 4400mAh battery and HEPA filter | $110 at 200 units |
| UAH08L | 170W | 12000Pa / 30 minutes | 620ml clean / 550ml dirty | Self-cleaning and LED display | $136 at 300 units |
Choose UAH012L for roller contact and clean-water capacity
The featured model gives the largest clean-water tank among these three direct records and is the only row identified with dual roller brushes. That makes it the logical configuration when buyers want to evaluate two-roller floor contact and fewer clean-water refills. The tradeoff is a higher entry-tier unit price than the two compared siblings, so buyers should map the extra cost to a channel-relevant roller or tank benefit.
Choose a sibling when battery or entry price leads
UAH18L deserves attention when a detachable battery, 50-minute catalog runtime, HEPA filter, or $110 entry tier at 200 units is central to the range plan. UAH08L is a 170W, 12000Pa option with 30-minute runtime and a $136 entry tier at 300 units. Do not mix one model’s battery, tank, price, or accessory claim into another model’s listing.
Approve one model per claim set
Use separate approved copy sheets for UAH012L, UAH18L, and UAH08L. Tie each sheet to its model, photos, manual, packaging artwork, and supplier quotation revision. This simple control prevents a common catalog error: a marketplace listing keeps the featured model’s image but inherits a sibling’s stronger suction, longer runtime, or lower price.
// 06 — Commercial terms
How do unit tiers change landed-cost planning?
The UAH012L wet dry vacuum cleaner has four published catalog tiers: $160 at 300 units, $155 at 500, $153 at 700, and $151 at 1000. These are product prices, not landed costs. Buyers still need a current quotation that fixes configuration, packaging, Incoterm, payment, freight responsibility, destination charges, and quote validity.
Use the published tiers without rewriting them
| Quantity | Published discount | Published unit price |
|---|---|---|
| 300 | $0.00 | $160.00 |
| 500 | $5.00 | $155.00 |
| 700 | $7.00 | $153.00 |
| 1000 | $9.00 | $151.00 |
The first catalog tier is 300 units. Smaller trial orders are available on request, but no smaller fixed quantity or price is published for UAH012L. Keep that distinction clear: a requested sample or trial is not the same as a confirmed production MOQ. Ask the quotation to identify any setup, artwork, sample, tooling, inspection, and spare-parts charges rather than assuming they are included.
Normalize quotes before comparing suppliers
Build one comparison sheet with model revision, color, logo method, retail box, master carton, included accessories, spare ratio, warranty handling, inspection point, Incoterm, port, and payment schedule. Standard terms in the model record are 30% deposit and 70% balance before shipment by T/T, with Alibaba Trade Assurance supported. Available shipment terms include FOB, EXW, and CIF.
Lead time is listed as about 15–30 days for bulk production after deposit, while samples are listed at 3–7 days. Treat those as current catalog ranges, not guaranteed dates. The purchase order should carry an agreed production schedule and a clear start event, such as deposit receipt and final artwork approval.
Request battery transport evidence for the shipped pack
The 4000mAh battery makes logistics documentation part of sourcing, not an afterthought. The UNECE Manual of Tests and Criteria page includes subsection 38.3 for lithium cells and batteries. Request the UN 38.3 test summary and shipment documents that match the actual cell, battery, product model, and transport mode; do not accept an unrelated generic file.
Freeze OEM details before deposit
OEM and ODM options include logo, packaging, color, and specification work. Put each requested change on a signed artwork or specification revision. For the electrical version, the UAH012L catalog says 110–220V. Record the destination plug, frequency, charger, cord or adapter details, language, warnings, recycling marks, and importer information in the signed artwork and specification revision.
// 07 — Factory process
How we manufacture the UAH012L program
Founded in 2005, Guilin Use at Home Technology Co., LTD operates seven production lines in its documented 15,000 m² facility, as recorded in the Trust Center. For a UAH012L wet dry vacuum cleaner order, the control path covers tooling and appearance approval, pump and electronics checks, wet-system and functional inspection, then market-specific compliance and warranty release.
Tooling, private mould, and golden-sample approval
The program begins by fixing exterior parts, color, logo position, surface finish, tank fit, roller access, and packaging artwork. The approved golden sample becomes the visual and functional reference. Any private-mould or tooling change should carry a revision, owner, approval date, and effect on parts or packaging.
Pump, battery, and PCBA burn-in checks
The production control plan covers pump operation, electronic controls, display behavior, charging, powered traction, automatic dirt detection, upright standby, and agreed burn-in criteria. The order file should name the charger and battery configuration so test evidence and labels stay tied to the product that will ship.
Wet-path, suction, roller, and quality control
Functional inspection checks clean-water delivery, dirty-water recovery, tank seals, suction path, dual rollers, self-cleaning, controls, and included accessories against the approved sample. Packaging inspection then confirms the unit, cartridge, roller brush, printed materials, labels, and carton marks. The buyer should agree inspection sampling and acceptance rules in writing.
Compliance names and 12-month warranty release
CE and RoHS are relevant export compliance names, but the applicable documents vary by product line and destination market. Release shipment against model-specific evidence; no compliance name alone proves coverage. Every unit carries a 12-month warranty, and the order should define parts, claims evidence, remedy, and after-sales communication.
// 08 — Buyer questions
Frequently asked questions about wet dry vacuum cleaner sourcing
Buyers most often ask whether suction is sufficient, whether the machine replaces a mop, how much maintenance wet pickup creates, which floors it supports, and what commercial or battery documents belong in the file. The short answers below separate UAH012L catalog facts from claims that still require a market-specific sample or document review.
How much suction is good for a wet and dry vacuum cleaner?
Can a wet dry vacuum replace mopping?
Do you have to clean a wet dry vacuum after every use?
Can you use a wet dry vacuum on carpet?
What is the UAH012L MOQ and warranty?
What battery paperwork should importers request?
// 09 — Decision
Is UAH012L right for your product line?
The UAH012L wet dry vacuum cleaner is a practical shortlist candidate when a buyer wants 250W power, 16000Pa suction, 40-minute catalog runtime, a 750ml clean tank, dual rollers, automatic dirt detection, and self-cleaning in one cordless platform. Compare its measured floor-test results with the signed specification and compliance file before making the range decision.
Use a pass-or-revise decision rule
Approve the model only when documented results meet the pickup, water-recovery, tank, roller, noise, runtime, charging, labeling, packaging, and user-care criteria written before testing. If a result misses the requirement, revise the product, the claim, or the target use case. Do not solve a failed sample by weakening the record after the test.
Send one complete request for quotation
State destination market, sales channel, annual plan, first-order quantity, color, logo, packaging language, plug, charger, included accessories, spare-parts request, inspection expectations, Incoterm, and required compliance documents. Link the request to the exact UAH012L product page so the quotation cannot drift to a sibling.
// 10 — Product range
Featured model and similar products
Start with the UAH012L wet dry vacuum cleaner when the dual-roller and larger clean-water-tank combination matches the brief, then use current model pages to build the surrounding range without blending specifications. The cards below provide live product and quotation links for that range-planning step.
Featured UAH012L wet dry vacuum cleaner
Featured model · UAH012L
Wet Dry Vacuum Cleaner, 250W, 16000Pa, Dual Roller
4000mAh battery · 40-minute catalog runtime · 750ml clean / 600ml dirty tanks
Similar live catalog products
Wet Dry Vacuum Cleaner, 250W, 18000Pa, HEPA Filter
Kabelloser Staubsauger, 165W, 12000Pa, LED-Display
Бездротовий пилосос, 200W, 16000Pa, LED дисплей
Wet Dry Vacuum Cleaner, 170W, 12000Pa, Self-Cleaning
Ready to order or need a wholesale quote?
Vacuum Cleaners China manufactures vacuum cleaners direct from our Guilin, China factory — OEM, private-label and B2B welcome. Tell us your market, configuration, and volume.
