Vacuum Cleaners China, operated by Guilin Use at Home Technology Co., Ltd., is a dedicated floorcare factory in Guilin, Guangxi. Robot vacuums sit alongside our cordless stick, wet-dry and floor-scrubbing production, which means the people specifying a robot’s floor-head and brush geometry are the same people who build the rest of our floorcare range. We supply laser and gyroscopic robots up to 20,000Pa, factory-direct, for OEM, ODM and private-label programmes.
Robot vacuums are often built by electronics assemblers who treat the cleaning head as an afterthought behind the navigation stack. We came to robots from the other direction — from cordless sticks, wet-dry units and floor scrubbers — and it shows in where we spend engineering effort.
A pascal rating is measured in a sealed test, but an end user experiences whatever the floor-head, brush and seal actually deliver on their carpet or tile. Brush geometry, the gap between brush and floor, and how well the head seals against the surface change real-world pickup more than the last few thousand pascals do. That is floorcare engineering, and it is the part most robot specifications gloss over.
Hard floor, low-pile carpet, high-pile rug and tile grout each reward a different head configuration. When you tell us which surfaces dominate the homes in your market, we can specify against that rather than handing you the highest number on the sheet.
Hair tangling around a brush roll is the most common practical complaint in every floorcare category, robots included. Brush configuration for pet hair is a design decision, not a marketing line, and we build specific configurations for it.
The range is tiered, because a market needs more than one price point.
Random navigation covers a room by persistence — mechanically simple, genuinely adequate in small apartments, and priced to bring first-time buyers in. Our random builds run about 1,000Pa to 1,499Pa, with roughly 60 minutes of runtime and a 285ml dustbin. Gyroscopic navigation cleans in structured rows for a large coverage gain at modest cost, and is the volume seller in most markets. Laser navigation maps the space, plans a route and reports to a phone app with no-go zones and scheduling, reaching 20,000Pa with auto-charging.
We build 2-in-1 sweeping-and-vacuuming machines and 3-in-1 sweep-vacuum-mop robots with a water tank and mop plate. In floorcare terms the mop plate is a genuine wet-cleaning stage rather than a damp cloth, and it is now the mainstream expectation rather than a premium extra.
Capacities run from around 1,500mAh and 2,600mAh to 3,000mAh. Runtime trades directly against suction, so the sensible way to specify is to decide the floor area a machine must cover on one charge and work back from there.
Standard models use an onboard bin. Top models dock to an auto dust-collection base with a 4L bag — the feature end users most often name as their reason for upgrading. We also build square-format chassis for corner reach, anti-drop sensors for stairs and level changes, and remote control on non-app models.
Robots are assembled and tested in-house in Guilin, on the same site and by the same QC organisation as the rest of our floorcare production.
Chassis and housing components run on moulds we own, so a private-label programme can be genuinely differentiated rather than a badge on a shared shell, and the tooling remains available for repeat orders.
Navigation is run against a furnished floor plan, not an empty square. We test docking and auto-charging reliability, battery charge and discharge cycling, suction at the floor-head, water-tank sealing on mopping builds, brush-roll behaviour with hair loading, and anti-drop response at a step edge. On app models, pairing, map handling and scheduling are part of the test pass.
CE, RoHS, UL, ETL, FDA, FCC, ISO 9001, BSCI, UKCA, EAC and KC are available across the range, with further marks on request. A robot carries a battery, a radio and a motor, so the certificate set is larger than for a simple appliance. Not every model holds every mark, and we match the set to the exact models and destination market rather than sending a generic folder.
Most of our robot output ships under a customer’s brand.
Chassis colour and finish, branding on unit, dock and packaging, navigation tier, suction and battery specification, 2-in-1 or 3-in-1 build, floor-head and brush configuration including pet-hair variants, remote or app control, dock type including auto-empty, plug and cord set, and the full manual and carton artwork set.
Robots carry heavy tooling and firmware cost. Starting from a proven platform and changing what your market notices — navigation tier, head configuration, finish, packaging — delivers a differentiated range without funding a chassis mould and a navigation stack you may not amortise on a first order.
The navigation tier, the suction and runtime you intend to advertise, 2-in-1 or 3-in-1, whether an auto-empty dock is needed, the dominant floor surfaces in your market, destination and quantity. We will quote against a real bill of materials and be direct about where a cheaper build would cost you in returns.
Software makes hardware easy to disguise in this category. These are the questions that separate a factory from a rebadger.
Ask what the brush geometry is, how the head seals to the floor, and how it behaves on high-pile carpet. A floorcare factory has an answer; an assembler quotes the suction figure again.
Motor or floor-head. The two numbers differ substantially for the same machine, and only one reflects what the customer experiences.
Random, gyroscopic or laser. “Smart navigation” describes all three and therefore none of them.
Brush tangling drives more practical complaints than almost anything else. A supplier who has engineered for it will describe the configuration; one who has not will call it self-cleaning and move on.
Runtime at month ten decides your review score far more than runtime at month one. Ask what cycle testing has actually been run.
Compliance is where a cheap order stalls at customs. Across our range we manufacture robot vacuum cleaners to the international marks below, with custom certifications on request — not every model holds every mark, so we match the certificate set to your destination market.
For every order we supply the matching certificates and test reports your customs broker and retail channel require, so the shipment clears and lands without a paperwork stall.
The terms behind an order are built for a straightforward first purchase and a repeatable re-order.
| Term | Detail |
|---|---|
| Minimum order (MOQ) | From 100 units per model, lower on select items — OEM runs included. |
| Lead time | 15–30 days from a confirmed PO and deposit, depending on volume and customisation. |
| Samples | Available and paid; the sample charge is credited back against your bulk order. |
| Payment | 30% deposit / 70% balance by T/T; Alibaba Trade Assurance supported. |
| Trade terms | FOB China (also EXW / CIF), shipped by sea or air to your port. |
| Warranty | 12-month warranty on every unit, with compliance documentation for export. |
| Customization | Custom logo, colour, specs, packaging and manuals — full OEM / ODM / private label. |
Vacuum Cleaners China is a multi-category OEM factory. Sourcing more than one product line? Consolidate it under one supplier, one set of terms and one QC standard:
We are a factory. Vacuum Cleaners China is operated by Guilin Use at Home Technology Co., Ltd., and robots are tooled, assembled and tested in-house in Guilin, Guangxi, alongside our cordless stick, wet-dry and floor-scrubbing production.
Pickup is decided at the floor-head, not in the pascal rating. Because we build the rest of our floorcare range on the same site, brush geometry, head sealing and surface behaviour get proper engineering attention rather than being treated as an accessory to the navigation stack.
Random navigation at the entry tier, gyroscopic navigation as the volume seller, and laser navigation with app control, route planning, no-go zones and auto-charging at the premium tier.
Suction runs from around 1,000Pa to 20,000Pa, with battery capacities from roughly 1,500mAh to 3,000mAh and runtimes around 60 minutes on lower settings. Suction and runtime trade against each other, so we specify from the floor area a machine must cover on one charge and the surfaces in your market.
Yes. Brush and floor-head configurations for pet hair are a specific design option rather than a marketing description, because tangling is the most common practical complaint across all floorcare categories.
From 100 units per model, lower on selected items, with OEM and private-label included. Production is 15 to 30 days from a confirmed order and deposit, depending on volume and customisation.
CE, RoHS, UL, ETL, FDA, FCC, ISO 9001, BSCI, UKCA, EAC and KC across the range, with more on request. Robots carry a battery, a radio and a motor, so the certificate set is larger than for a simple appliance and we match it to your destination market.
📧 [email protected] · 📞 +86 159 7211 2720 · Request a quote · Browse our robot vacuum cleaners